Miele Washing Machine Fault Codes

Home » Help & Advice » Miele Washing Machine Fault Codes

Miele is a German electronics manufacturer with one of their most popular appliances being the washing machine. Miele quality results in a long service life, low noise levels and A+++ energy ratings – providing your laundry with the best possible care.

So, what happens when your washing machine starts experiencing problems? Read on…

Miele washing machine fault codes

Error codes can help diagnose an issue with your Miele washing machine. The specific number identifies what the error is in the system, and can be helpful in finding a resolution to the problem, even if you can’t fix it yourself.

A Miele washing machine fault codes list includes:

Code F1/F2 – NTC sensor has short-circuited due to a problem with the water/heating

Code F10 – a water intake issue

Code F11 – water drainage difficulties

Code F15 – a hot water intake fault

Code F16 – excess detergent detected

Code F19 – a slow flow meter resulting in rotation complications

Code F20 – heating hitches

Code F29 – heater steam inactive

Codes F34/F35 – unable to lock or unlock the door

Code F39 – an electronic unit failure

Code F41 – incorrect data from faulty electrical memory

Code F43 – appliance model not programmed

Code F45 – Flash Ram defective supplying incorrect data

Code F50 – a drive issue

Code F51 – a level switch or sensor pressure problem

Code F53 – Miele washing machine fault code F53 indicates a speed sensor fault has been detected

Code F56 – the final spin speed is less than 400rpm

Code F62 – the programme selector is defective

Code F63 – the water path control unit has failed

Code F65 – drum lighting cap missing

Code F81 – steam inactive from the heater unit

Code F83 – the heater unit ha is experiencing excessive temperatures

Code F92 – indicates a bacterial contamination risk

Code F100 – a communication link failure

Code F104 – low voltage to the drive

Code F138 – water in the drip tray

Code F140 – drainage dispenser unit fault

For more help and information relevant to your particular Miele washing machine model you can identify additional error codes from your manufacturer’s manual.

Miele washing machine troubleshooting

Miele washing machines have built-in diagnostic tools that recognise when the appliance is experiencing difficulties. Error codes may be accompanied by flashing or solid messages. See a range of troubleshooting implications here:

Washing machine without display

When your washing machine has a blank display, and the stop/start button doesn’t light up this denotes that there isn’t any power. This could be due to a power supply problem, a faulty plug or power socket, or a blown fuse. Alternatively, the display has switched off automatically and is in standby mode to conserve energy.

If the fault persists, you’ll need to arrange a visit from a qualified appliance repair engineer who can safely fix any electrical-related issues.

Washing machine inlet/drain light flashing

Reasons for causing this can include the stopcock being closed, a clogged water inlet filter, a kinked inlet hose, or the in-site water pressure being too low. Other issues could be that the end of the drain hose is positioned too high, or the drain pump is being obstructed. If activated the water protection system will also result in this flashing message.

Technical fault with exclamation mark flashing

All you can do here is switch off your washing machine and disconnect it from the mains power supply. You’ll need some professional advice and help with fixing the identified technical fault which could be connectivity issues, wiring problems, or control panel difficulties.

An audible signal accompanying Call Service message

This indicates that the drum lamp isn’t fitted correctly and may need to be repositioned. As this is located behind the drum drawer panel and will require a lever to be inserted into the drum lighting slot, this is often best left to the experts.

Other Miele troubleshooting issues can relate to:

Washing machine leaking

If the leak is from around the door this could be due to a damaged door seal where small items have become trapped. Leaks from under the appliance indicate a connection problem with the drain hose.

Miele washing machine repair

A trusted Miele washing machine engineer will undertake many repairs and fix them quickly and effectively – usually on the spot. With up-to-date training and years of industry experience, a fully trained technician will call you 30 minutes prior to arrival, and there’s no call-out fee. Your Miele washing machine will soon be working as new, and you’ll be able to arrange future servicing too!